CALL WHOLESALE SUSPENSION ARNDELL PARK

(02) 9831 8825

1/24 LIDCO STREET ARNDELL PARK, NSW 2148

80% Speed,100% Accuracy

Download the

Enter your details and download today!

HARDRACE PHILOSOPHY


Hardrace shares the same philosophy as many seasoned and professional racecar drivers; 80% speed and 100% accuracy. Speed and power alone does not constitute to a fast lap time, but a combination of a well setup, balanced vehicle. 100% accuracy, during cornering, braking & throttle control, will always yield the better lap time.

PRODUCTS


Hardrace R&D and produce a huge range of aftermarket performance upgrade parts like Camber adjustable arms, Wishbone arms, Toe arms, Bushings, Engine mounts, Roll centre tie rod ends, Roll centre ball joints, & Super angle tie rod ends.

CAMBER ARMS


HARDRACE Camber kit made chassis alignment more accurate, the arm of camber kit series include elevation angle, inclination angle and beam angle products, etc. HARDRACE camber kit reduces tire wear and increase tire durable. Made with harden rubber bushing, provide advanced stability and accurate response steering, especially during high speed driving and cornering.

ADJUSTABLE CONTROL ARM


Adjustable control arm made with hardened steel and compound with hard rubber bushing or pillow ball bushing. A good control arm can regulate the movement of wheels quickly each time you turn or corner.

CONTROL ARM & WISHBONE


Control arm or wishbone is a roughly triangular suspension part, which pivots in two places. The broad end of the triangle attaches at the frame and pivots on a bushing. The narrow end attaches to the steering knuckle and pivots on a ball joint.

HARDRACE Control arm made with hardened steel and compound with hard rubber bushing or pillow ball bushing. A good control arm can regulate the movement of front wheels quickly each time you turn or corner. That way, your wheels can move without the risk of over steering.

ADJUSTABLE ARM


HARDRACE adjustable arm made by unique high density steel, collocation with harden rubber bushing (street racing) or anti-dust pillow ball bushing (drifting), provide excellent stability during high speed driving or hard cornering.

Adjustable links are assembled with wave washers between nuts and bolts, which enable both of them can tight more harder, won’t come loosen or back off.

In additional, wave washer allow many times loosen and tighten again, unlike competitor’s products are difficult to loosen or tighten while doing the next alignment in the future.

TOE ARMS


Car alignment is absolutely crucial when modifying your car, especially in toe adjust. HARDRACE Toe arms allow for fine-tuned adjustments to the rear toe in/out setting of the vehicle. It helps to raise straight line stability and road control. Toe arm made with high-strength steel alloys to offer high durability, strength and yet remain light-weight.

CASTER ROD


Caster is the angle between the steering axis and the vertical axis as viewed from the side of the car. Castor Rod allow adjustment in vehicle castor to bring the wheels forward and increase steering response. In general, the more castor the better. Allowing sharper turn in and faster return to the straight position when letting go of the wheel.

Wholesale Suspension has a new and exciting range of adjustable arms for various Japanese and European makes and models.

Allowing for precise adjustment of camber, caster and toe to increase performance and reduce tyre wear.

These control arms are made from forged high density steel, with a choice of either a hardened rubber bushing (street/race) or an anti-dust pillow ball bushing (drift/race).

Hardrace adjustable arms provide advanced stability during high speed driving or hard cornering, and give immediate response from the drivers steering input under acceleration.

Anti-Dust Pillow Ball Bushing


Handling control and responsive steering is superior than harden rubber bush.

Excellent driver feedback, precise control and solid suspension feel.

Inner bushing is made accurately with both high molecule plastic tube and specific metal alloy.

High durability and reliability.

Outer bushing is combined by TPV material anti-dust boot, 100% resistant from dust, water and oil, extend the life of the bushing.

BODY REINFORCED BUSHING


Body reinforced bushing can eliminate vehicle vibration, axle tramp and strengthen body/chassis stability, it’s available to fit OE mounts and helps in removing the unwanted movement of the rear crossmember

TIE ROD ENDS


Tie rod ends are designed with high quality alloy steel. The whole lot of tie rod ends is produced using CNC turning machines and microprocessor controlled grinders. The ball pins are cold forged, which are subjected to HF induction in order to ensure long life. These tie rod ends are designed to have maximum accuracy, which enables them to sustain extensive load.

ROLL CENTRE BALL JOINT


The roll center adjuster kit enables the vehicle to be lowered without detriment to the suspension system.

  • Decreases body roll
  • Improves tire contact patch with the road
  • Increases steering wheel responsiveness
  • Enables increased cornering force

TIE RODS


Super Angle Tie Rods to give the car a bigger steering angle.